SAnTex code examples#
- A complete brief intro to EBSD processing using SAnTex
- Load the required modules
- Load the ebsd ctf file
- Get the available phases information
- Load the ebsd file in a dataframe
- Pole Figures, Pole Density function, Inverse pole figures
- Plot the ebsd file, default: x2east, zoutofplane
- Calculate the stiffness tensors and the density at Pressure = 1.4GPa and Temperature = 1100 K (Chatzaras et al. 2016)
- Get the euler angles from ebsd file
- Calculate the stiffness tensors and the density at ambient pressure and temperature
- Calculate the stiffness tensors and the density at pressure = 1.4GPa and temperature = 1100K, and assumed melt of 7%
- Rotating the dataset by 90 degree around the z-axis
- Rotating ebsd for matching SEM orientation
- Cleaning EBSD data
- Removing data with MAD > 0.7
- Calculating grain boundaries with threshold of 10 degrees misorientation
- Removing grains with grain size less than 10 pixels
- Calculating Anisotropy
- Anisotropy calculation for a stiffness matrix and density
- 3D VTK plotter plots
- Material Analysis
- Tensor Analysis
- Rotate Tensors
- Isotropic Velocities Analysis
- Define isotropy instance
- Get Available phases
- Get phase constants for e.g. Forsterite
- Get velocities and densities
- Modal Mineral Composition of a Rock and calculate seismic Anisotropy